An elegant, high performance carrying case that charges your battery while you store it! This smart portable charging case (PCC) has a LCD indicator screen built in, to let you know when it's time to recharge the case. Includes wall plug and mini USB cable.



How to charge a Revolver Elite battery with this PCC:

1.) Screw the battery into the battery charging slot of the PCC

2.) Press and hold the button on the front of the PCC until the Green LED flashes.

3.) If the battery is dead, the LED will turn Red (if the LED remains Green the battery is fully charged).

All lights will then turn off to conserve power.

Your battery is now charging (Allow 15 - 30 minutes for the battery to charge). Once the battery is charged, the PCC will shut off automatically and will not drain the battery. (To check the status of your battery, press the button; if the light immediately turns on red, it is still charging)

How to charge the PCC

The PCC includes a built in LCD screen. This screen displays the amount of charge remaining in the case. This is indicated with five (5) back-lit bars.

To view these bars, press the button located on the front of the PCC. A blue back light will turn on and display the remaining charge.

If the LCD screen does not display any bars, the PCC is out of power, and must be charged.
( Please read the following steps to learn how to charge the PCC)

1.) Connect the Revolver mini USB cable to the bottom of the PCC.

2.) Plug the USB end into the Revolver Wall Adapter, Plug this wall adapter into a US power outlet.
or
2.) Plug the USB end into any powered USB port (etc. a Computer)

The PCC is now charging, The bars will begin to cycle through